Corrosion Resistant Rubber Lining - For process equipment/vessels, storage tanks, ducts, columns and other specialized items.
Abrasion Resistant Rubber lining - For chutes, hoppers, launders, bins, ball mills, cyclones, ducts etc.
Rubber Lined Pipes & Fittings and Equipment including Fabrication - For both corrosive and abrasion resistant services as per client's requirement.
Fabrication and Rubber lining of Process Equipment / Vessels - As per client's requirement.
Special Lining and Gaskets - In Hypalon, Neoprene, Butyl, Nitrile, EPDM and Natural Rubber.
Rubber Sheets - Natural and Synthetic rubber Pre-vulcanised sheets for Chemical & Abrasion resistance.
Water Proof Membranes - Flexible membranes of Butyl, EPDM and Butyl / EPDM for Lining of canals, dam beds and structures, effluent pits, evaporation ponds, roofings, etc.
Ebonite Products - Tubular liquid distribution and distance pieces resistant to chemicals and temperature.
Special Rubber Putty and Special Adhesives - For all types of repairs at client's factory.
|Soft Natural Rubber||30oA - 70oA||Suitable upto 70oC. Lower hardness compounds for abrasive conditions and higher hardness compounds for chemical resistance|
|Semi-Ebonite Natural Rubber||60oD - 70oD||Suitable upto 100oC.Resistant to chemicals except chlorine and chlorine-based compounds|
|Black Semi-Ebonite Natural Rubber||65oD - 75oD||Suitable for fluorine, caustic Soda ( Low Ca, Mg Si) & Membrane cell Industry upto 100oC|
|Ebonite Natural Rubber||75oD - 85oD||Suitable upto 100oC. Highly resistant to chemical attack including chlorine and chlorine - based compounds|
|Neoprene||60oA - 70oA||Suitable upto 110oC. Has good abrasion resistance and chemical resistance even in presence of mineral oil|
|Butyl / Bromo Butyl||50oA - 60oA||Resistant to most chemicals of temperature upto 100oC. Has excellent water - proofing and weathering characteristics.|
|Hypalon||55oA - 65oA||Has excellent resistance against sulphuric acid, chromic acid and other oxidizing agents even upto 120oC|
|Food Grade Natural Rubber||60oA - 70oA||Suitable for Pharmaceutical & Syrup processing industries upto 70oC|
|Nitrile Ebonite||70oD - 75oD||Suitable upto 110oC. Resistant to mineral oils and many solvents|
|Silicone Rubber||40oA - 80oA||Suitable for temperature range 30oC to 180oC. Resistant to oxidation effect and most chemicals. Has also excellent weathering characteristics.|
|Soft/Hard/Soft (Triplex type-triple layer)||55oA - 69oA||Suitable for combined resistance to chemical, abrasion and mechanical shocks upto 90oC|
|EPDM||70oA - 80oA||Suitable upto 100oC. Resistant to most chemicals. Used extensively for gaskets. Has excellent water proofing and weathering characteristics|
|Viton (Moulding Compound)||70oA - 80oA||Suitable upto 180oC. Resistant to highly corrosive Chemicals and oils.|
The above chart is only general in nature. We recommend that our experts be consulted for selection of lining compounds specific to each case.
MIL employs two of the largest autoclaves in the country for vulcanizing factory-lined equipment. The Cold Bond Technique pioneered by MIL in India has been accepted as the most suited for site lining of large storage tanks, particularly under tropical conditions.
• Autoclave Vulcanization
• Internal Pressure (High / Low) Vulcanization
• Exhaust Steam / Hot Water Vulcanization
• Cold Bond System.